One-gang junction box HWD B15

Article no: 9464-15
EAN: 4013456533561

for shipbuilding walls of category B15

For panel thickness

7 - 40 mm

Depth

54,5 mm

Cut hole Ø

74 mm

Fixing screw spacing

60 mm

Conduit entries up to Ø 13 mm

Support connectors for each package

Combination distance through single separation of the pre-embossed edge

71 mm

Halogen-free

Yes

Packaging inner/dispatch

10/100

Add to the project list

Download product data sheet (PDF)

Show additional downloads

HWD B15 cavity wall box for shipbuilding walls

HWD B15 cavity wall box for category B15 partitions reacts to a fire very quickly. The integrated fire-retardant coating intumesces and reliably seals the installation opening. The HWD B15 cavity wall boxes protect against fire and smoke in the fire-protection zone and preserve the B15 function of the fire-protection wall for at least 30 minutes of flames.

For category B15 partitions
Encasing is not necesssary
With fire-protection cover, can be used as a junction box
Retrofitting also possible

Certified and designed for fast installation

Expensive and time-consuming encasing, i.e. metal, is avoided with the HWD B15 cavity wall box. The user is guaranteed a certified and fast installation.

Installation in mineral-based walls

In walls with mineral-based materials, working with the cutter (Art. No. 1082-40) is quick and simple. It cuts the required Ø 74 mm wall hole and creates the basis for an exact box installation that is flush to the wall.

Occupancy can be for a max. of four entries of up to Ø 13 mm as well as for flame-retardant cables in accordance with UL-VO. Use the KAISER universal opening cutter to cut the openings for the cable entry.

Fit the HWD B15 cavity wall box in the wall using FX⁴ screws.

For board thicknesses from 0.2 to 40 mm.

Installation in metal-covered walls

Cut the installation opening in metal plates with the cutter (Art. No. 1086-74).

Open the cable entry with the KAISER universal opening cutter.

Fit the HWD B15 cavity wall box in the wall using FX⁴ screws.

For thin boarding, one-gang boxes and one-gang junction boxes attached by straps are available for a clamping range of 0.2 mm and higher.

Combinations

It is very easy to combine one-gang junction boxes. After cutting the cutting holes (Ø 74 mm) at a standard distance (71 mm), remove the marked area of the holding ring.