Results filtered according to:
No results were found for the filter!
Quickbox® Maxi HWD 90 1x1
International products
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Quickbox® Maxi HWD 90 2x2
International products
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Quickbox® Maxi HWD 90 3x1
International products
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Quickbox® Maxi HWD 90 2x2
International products
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Quickbox® Maxi HWD 90 3x2
International products
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Electronics box HWD 90
- For cables and conduits up to M25
- Also for use as a double box
- For fire-protection walls F30-F120 or EI30-EI20
- minimum wall thickness 100 mm
- For equipment inserts and electronic components
- Tunnel twin-chamber box with enclosed separator wall and cover that can be wallpapered over.
- Can be combined with each other and also with HWD 90 one-gang junction boxes
For panel thickness: 7 - 40 mm Depth: 70 mm Cut hole Ø: 2 x 74 mm
Support connector
- For fully insulated through-wiring in combinations
- Smokeproof
- for Art. Nos. 9463-03, 9464-03
Ceiling box HWD 30
- for fire protection ceilings F30-F90 or EI30-EI90
- For F30 (EI30) non-insulated fire-protection ceilings
- For F60 (EI60) fire-protection ceilings backed with mineral insulation materials in compliance with EN 13501 part 1
- for F90 (EI90) fire-protection ceilings with Rockwool/Termarock 100
Depth: 44 mm Cut hole Ø: 74 mm Screw spacing: 60 mm
Ceiling junction box HWD 30
- for fire protection ceilings F30-F90 or EI30-EI90
- For F30 (EI30) non-insulated fire-protection ceilings
- For F60 (EI60) fire-protection ceilings backed with mineral insulation materials in compliance with EN 13501 part 1
- for F90 (EI90) fire-protection ceilings with Rockwool/Termarock 100
Depth: 54,5 mm Cut hole Ø: 74 mm Screw spacing: 60 mm
One-gang box HWD B15
- for shipbuilding walls of category B15
For panel thickness: 7 - 40 mm Depth: 44 mm Cut hole Ø: 74 mm
HWD B15 one-gang box for thin boarding
- for shipbuilding walls of category B15
For panel thickness: 0,2 - 40 mm Depth: 44 mm Cut hole Ø: 74 mm
One-gang box HWD B15 for thin boarding 40 mm
- for shipbuilding walls of category B15
For panel thickness: 0,2 - 40 mm Depth: 40 mm Cut hole Ø: 74 mm